excl. VAT
Article no.: 49511

6x18m 2.6m Sides Commercial Storage Shelter, 4.1x2.9m Drive Through, PVC 850, dark green without statics package

Viking
  • flat gable roof design with high sides for extra large entrances
  • 2 large double zip gates on each of the two gable end
  • very tear-resistant PVC tarpaulin 850
  • extra strong oval tube profile made of fully galvanised steel
  • optional safety statics set
  • eaves height 2.6m
Colour:
dark green
Statics:
Calculate delivery costs now
Free Mainland delivery
£4,999.00incl. 20% VAT
Special stock, please contact our customer service. Please note that higher costs may occur.
Buying tips and enquiries

The Viking industrial tent

  • foundation not needed - the perfect, flexible large garage!
  • with flat gable roof - ideal for especially high vehicles!
  • protects from wind & rain - simply the best outdoor storage!
* Product may differ in size and colour from the image.
Areaca. 108.00 m²
Widthca. 6.00 m
Lengthca. 18.00 m
Eaves heightca. 2.60 m
Ridge heightca. 3.60 m
WxH Door 1ca. 4.10 x 2.90 m
WxH Door 2ca. 4.10 x 2.90 m
Number of boxes:27
Longest side:ca. 2,09
Total Weight:ca. 905.69 kg
CAR_WIK_CON_6x6
1
2
3
4
5
6
* Product may differ in size and colour from the image.
1

Steel poles

2

Pole connectors

3

Sidewall supports

4

Gable wall bracing

5

Roof supports

6

Anchoring

CAR_WIK_TARP_6x6_H4
1
2
3
4
5
* Product may differ in size and colour from the image.
1

Material

2

Roof & sides tarpaulin

3

Gable walls

4

XXL floor skirts

5

Tarpaulin tensioning system

* Product may differ in size and colour from the image.
  • In many cases, no building permit is required
  • simple assembly thanks to detailed assembly instructions and marked components
  • download the instructions
  • for erecting the construction we recommend: 1 lifting device with a lifting height of at least 3.5 m (forklift, wheel loader, etc.)
  • for assembly we recommend: 1 rolling scaffold, scissor lift, etc. with a lifting height of at least 3.5 m
  • Standard tools are sufficient for assembly
* Product may differ in size and colour from the image.
  • steel frame with bolts that pass through all elements, ground bar & roof supports
  • This tent consists of 2 individual tents that connect to each other with the help of watertight connecting gutters.
    • 1 x industrial tent 6x6m
    • 1 x industrial tent 6x12m
  • 2 large double zip gates on each of the two gable end
  • steel ground stakes, ca. 40 cm long
  • Assembly instructions

Reviews

Safety instructions

  • Wind and snowloads have not been tested for this tent.
  • Ensure the tent is assembled correctly and, in the event of light snowfall, remove snow from the roof immediately. In case of wind, you are advised to use our tie down kit. In case of strong winds and heavy snowfall we recommend temporary disassembly.
  • Alternatively, enquire about the Safety Plus package for tents with a side height of 2.6 m or more, in order to obtain guaranteed wind and snowload capacities.
  • Please observe the safety information included with the assembly instructions.
*25 According to the standard "DIN EN ISO 13934-1", the tearing strength is determined in a stretch test using a 5 cm wide strip sample of the tarpaulin. The specified value thus indicates the tearing force per 5 cm of tarpaulin width (in the lengthwise direction).