excl. VAT
Article no.: 49832

5x10m 3x3.4m Drive Through Industrial Tent with skylights, PRIMEtex 2300 fire resistant, grey with statics package (soft ground anchors)

Everest
  • pointed gable roof design allows precipitation to flow off particularly easily
  • robust and hard-wearing zip gate on both gable ends
  • tensioned, fireproof PRIMEtex 2300 tarpaulin with 5-year guarantee & skylights
  • fully galvanised steel frame with 10-year guarantee
  • optional safety statics set
  • eaves height 3m
Colour:
grey
Statics:
Calculate delivery costs now
Free Mainland delivery
£4,699.00incl. 20% VAT
available immediately
Special stock, approx. delivery time: 7 - 12 working days for mainland delivery. For customs and tax reasons, delivery can take longer as usual.
Buying tips and enquiries
* Product may differ in size and colour from the image.
  • The Everest Industrial Tent:
    • foundation not needed - the perfect, flexible large garage!
    • with a quick-opening pull-up gate on each side!
    • protects from wind & rain - simply the best outdoor storage!
Areaca. 50 m²
Widthca. 5 m
Lengthca. 10 m
Eaves heightca. 3 m
Ridge heightca. 4.45 m
WxH Door 1ca. 3 x 3.4 m
WxH Door 2ca. 3 x 3.4 m
WxH Personnel entranceca. x m
Number of boxes:1
Longest side of packaging;ca. 2.3 m
Total Weight:ca. 601.78 kg
ZHL_EVE_CONS_5m_6m
1
2
3
4
5
6
* Product may differ in size and colour from the image.
1

Steel poles

2

Pole connectors

3

Sidewall supports

4

Gable wall bracing

5

Roof supports

6

Anchoring

7

Statics package

ZHL_EVE_TARP_4m_SKY
1
2
3
4
5
* Product may differ in size and colour from the image.
1

Material

2

Roof & sides tarpaulin

3

Gable walls

4

XXL floor skirts

5

Tarpaulin tensioning system

6

Fireproof tarpaulin

* Product may differ in size and colour from the image.
  • in many cases, no building permit is required (depending on planning council)
  • simple assembly thanks to detailed assembly instructions and marked components
  • download the instructions
  • for erecting the construction we recommend: 1 lifting device with a lifting height of at least 3.5 m (forklift, wheel loader, etc.)
  • for assembly we recommend: 1 rolling scaffold, scissor lift, etc. with a lifting height of at least 3.5 m
  • Standard tools are sufficient for assembly
* Product may differ in size and colour from the image.
  • single-piece roof and sides
  • Hot dip galvanized steel structure
  • 2 gable panels with zip gate
  • solid steel ground stakes, ca. 100 cm
  • guy ropes
  • Assembly instructions
  • structural analysis

Notes on delivery

  • product is delivered in several boxes & by forwarding shipment
  • necessary for unloading the boxes: 1 forklift or electric pallet truck
  • unloading is only possible via the side of the lorry
  • ramp unloading from the rear is not possible

Reviews

Safety instructions

  • Please observe the safety information included with the assembly instructions.
*4 If the tent is secured correctly
*5 The specified values of gale forces and snow loads only apply separately and shall not occur jointly.
*7 Always follow the instructions from the structural analysis. Fresh snow should be removed from the tarpaulin in all cases.
*8 We refer to our previous experience and cannot guarantee that this will always be the case.
*9 Products with window elements are exempt. The window material is flame retardant and dissolves in a controlled way in order to let oxygen into the tent in case of emergency.
*25 According to the standard "DIN EN ISO 13934-1", the tearing strength is determined in a stretch test using a 5 cm wide strip sample of the tarpaulin. The specified value thus indicates the tearing force per 5 cm of tarpaulin width (in the lengthwise direction).